English (UK)
  • Deutsch
  • English (UK)


Hydrogen sulfide (H2S)

For our measurement sensor for determining the concentration of Hydrogen sulfide, we offer the following calibration gases.

UsageExplanation
Zero gas This gas is needed for the calibration of the zero point.
Standard test gas The standard test gas is required for calibration / adjustment of the sensor with a two-point calibration. The concentration value corresponds to 70% to 100% of the full scale value of the probe.
Alarm test gas The alarm test gas is required to verify the alarm levels.

 

Select the measuring range of your probe:

 

0 - 50 ppm

Measuring range
of the probe		GasUsageBottle filling volume (Liter)
34 l58 l110 l
0 - 50 ppm Synthetic air Zero gas Z0A0-L1373 Z0A0-M1373 Z0A0-N1373
50 ppm H2S in air Standard test gas Z0A0-O1510 Z0A0-P1510 Z0A0-Q1510
10 ppm H2S in air Alarm test gas Z0A0-O1502 Z0A0-P1502 Z0A0-Q1502

0 - 200 ppm

Measuring range
of the probe		GasUsageBottle filling volume (Liter)
34 l58 l110 l
0 - 200 ppm Synthetic air Zero gas Z0A0-L1373 Z0A0-M1373 Z0A0-N1373
200 ppm H2S in air Standard test gas Z0A0-O1519 Z0A0-P1519 Z0A0-Q1519
100 ppm H2S in air Alarm test gas Z0A0-O1513 Z0A0-P1513 Z0A0-Q1513