English (UK)
  • Deutsch
  • English (UK)


Propan (C3H8), Dimethylmethan, R 290

For our measurement sensor for determining the concentration of Propane, we offer the following calibration gases.

UsageExplanation
Zero gas This gas is needed for the calibration of the zero point.
Standard test gas The standard test gas is required for calibration / adjustment of the sensor with a two-point calibration. The concentration value corresponds to about two-thirds of the full scale value of the probe up to 50% LEL.
Alarm test gas The alarm test gas is required to verify the alarm levels.

 

Select the measuring range of your probe:

 

0 - 50% LEL

Measuring range
of the probe		GasUsageBottle filling volume (Liter)
34 l58 l110 l
0 - 50% LEL Synthetic air Zero gas Z0A0-L1373 Z0A0-M1373 Z0A0-N1373
0.85 vol% Propane in air Standard test gas Z0A0-L1254 Z0A0-M1254 Z0A0-N1254
0.4 vol% Propane in air Alarm test gas Z0A0-L1242 Z0A0-M1242 Z0A0-N1242

0 - 100% LEL

Measuring range
of the probe		GasUsageBottle filling volume (Liter)
34 l58 l110 l
0 - 100% LEL Synthetic air Zero gas Z0A0-M1373 Z0A0-M1373 Z0A0-N1373
0.85 vol% Propane in air Standard test gas Z0A0-L1254 Z0A0-M1254 Z0A0-N1254
0.4 vol% Propane in air Alarm test gas Z0A0-L1242 Z0A0-M1242 Z0A0-N1242